Axxess ASWC Installation Manual download pdf (Page 8)

TheASWC-1canbeprogrammedtwodifferentways.Itcanauto

programitselfthroughAutoDetectMode,oritcanbemanually

programmed(pp.19-21).Thefollowing,whichisrecommended,isfor

autoprogramming.

Auto Detect Mode: Overview

TheASWC-1hastheabilitytoautodetectselectvehiclesandwhat

aftermarketradioitisconnectedto.The“ASWC-1VehicleInstructions”,

foundatwww.axxessinterfaces.com,willindicateifyourvehiclewillauto

detectandwhataction,ifany,isrequiredforthisprocesstotakeplace.

Fortheautodetectfeaturetoworkthereare(3)possibleactionsthatmust

betaken.Note,onlyoneactionwillberequireddependingonthevehicle:

1. Turntheignitiononandnootheractionisrequired.

--- Or ---

2. Turntheignitionon,pressandholdtheVolume Upbuttononthe

steeringwheel.

--- Or ---

3. Turntheignitionon,andthentaptheVolume Upbuttonrepeatedly

onthesteeringwheel.

Auto Detect Mode: Steps

Note: Please read all Auto Detect Mode steps before beginning.

1) Completeconnectionstothevehicleandtheaftermarketradio.

2)

Turntheignitionon,theLEDwillstartrapidlyflashingRed;which

meanstheASWC-1islookingforthevehicleandtheradio.

Note: If the LED did not start flashing Red rapidly press the reset

button for 3 seconds and then proceed to Step 3.

3) Performactionrequiredforyourparticularvehicle,asnotedinthe

“ASWC-1VehicleInstructions”,downloadfromAxxessinterfaces.com.

ASWC-1 Installation

Programming

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 47 48

No comments

Axxess ASWC Installation Manual Page 8